Showing all 16 results

Vortex Switchview Throw Lever 3 (1.930″/49mm)

129.99$ CAD +TX.

“Maximize the efficiency of magnification transitions with fluid precision using Vortex’s SV-3 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-3 is one tough accessory that will serve you well.

Compatible with select riflescope magnification rings with a diameter of 1.930 inches / 49 mm.”

Vortex Switchview Throw Lever 2 (1.739:/44mm)

129.99$ CAD +TX.

“Maximize the efficiency of magnification transitions with fluid precision using Vortex’s SV-2 Switchview Throw Lever. The Switchview attaches and detaches easily to the magnification ring. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-2 is one tough accessory that will serve you well.

Compatible with select riflescope magnification rings with a diameter of 1.739 inches / 44 mm.”

Vortex Defender Flip Cap Objective Lens 40

34.99$ CAD +TX.

“This is the last flip cap you will ever need! Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics® and features a snap flat spring that will keep your line of sight unobstructed.

Outside diameter: 45.5-48.5 mm | 1.8-1.9 inches
Objective-40 Fits:
RAZOR® HD LH™: RZR-1589, RZR-1572, RZR-1565, RZR-1558

VIPER®: VPR-M-O4BDC, VPR-M-O1BDC

DIAMONDBACK® HP: DBK-04-BDC, DBK-M-04P

CROSSFIRE® II: CF2-31005, CF2-31007, CF2-31025”

Vortex Defender Flip Cap Objective Lens 50

34.99$ CAD +TX.

“This is the last flip cap you will ever need! Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics® and features a snap flat spring that will keep your line of sight unobstructed.

Outside diameter: 0-50 | 55-59 mm | 2.2 – 2.3 inches
Objective-50 Fits:

RAZOR® HD GEN II: RZR-31802, RZR-31803, RZR-52005, RZR-52006

VIPER® PST: PST-210S1-M, PST-43127, PST-43128, PST-624F1-A, PST-624F1-M, PST-624S1-A, PST-624S1-M, PST-416F1-A, PST-416S1-A

VIPER® HST: VHS-4310, VHS-4325

VIPER® HSLR: VHS-4315-LR, VHS-4307-LR

INTREPID® HD: INT-301

VIPER® HS: VHS-4307, VHS-4319

VIPER® : VPR-M-06MD, VPR-M-06BDC

DIAMONDBACK®: DBK-M-03P, DBK-03-BDC

CROSSFIRE® II: CF2-31011, CF2-31027

GOLDEN EAGLE®: TCS-1503”

Vortex Defender Flip Cap Objective Lens 56

34.99$ CAD +TX.

“This is the last flip cap you will ever need! Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics® and features a snap flat spring that will keep your line of sight unobstructed.

Outside diameter: 0-56 | 62-66 mm | 2.44 – 2.59 inches

Objective-56 Fits:
RAZOR® HD GEN II: RZR-42704, RZR-42705, RZR-42706”

Vortex Flip Cap Cover Size 6

19.99$ CAD +TX.

“Vortex Flip Cap Covers are designed to stretch tightly over your optic lens without restrictioin of your optic’s function. They feature easy, slip-on use; Silent Spring Open operation and Weather-Resistant protection.

Made in the USA.

Size 6: 46-55mm | 1.8″”-2.2″””

Vortex Flip Cap Cover Size 7

19.99$ CAD +TX.

“Vortex Flip Cap Covers are designed to stretch tightly over your optic lens without restrictioin of your optic’s function. They feature easy, slip-on use; Silent Spring Open operation and Weather-Resistant protection.

Made in the USA.

Size 7: 55-61mm | 2.2″”-2.4″””

Vortex Defender Flip Cap Objective Lens 24

34.99$ CAD +TX.

“This is the last flip cap you will ever need! Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics® and features a snap flat spring that will keep your line of sight unobstructed.

Outside diameter: 28.25-31.25 mm | 1.1-1.2 inches
Objective-24 Fits:
RAZOR® HD GEN II: RZR-16003, RZR-16004, RZR-16005

VIPER® PST™: PST-14ST-M, PST-14ST-A, PST-43111

STRIKE EAGLE®: SR-1624-1

CROSSFIRE® II: CF2-31037, CF2-31047”

Vortex Defender Flip Cap Eyepiece (40-46 mm)

34.99$ CAD +TX.

“This is the last flip cap you will ever need! Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics and features a snap flat spring that will keep your line of sight unobstructed. Rifle ranges the world over are littered with broken flip caps. This is one cap you will most likely never see in a flip cap boneyard. The E-10 cap has three stop positions. The first vertical, to put your dope disk (optional accessory) literally right in your face. The second at a 45° and the third at 90° to lay flat back.

The E-10 fits all Vortex® Riflescopes except the 1-inch tube Viper® models VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC.”

Vortex Flip Cap Cover Size 3

19.99$ CAD +TX.

“Vortex Flip Cap Covers are designed to stretch tightly over your optic lens without restrictioin of your optic’s function. They feature easy, slip-on use, Silent Spring Open operation and Weather-Resistant protection.

Made in the USA.

Size 3: 30-35mm | 1.2″”-1.4″””

Vortex Torque Wrench Gen II

129.99$ CAD +TX.

Tighten to the specified torque and not a smidgen more! Adjustable in 1 in/lb increments, this tool is easy to read, simple to set, and offers fast, accurate tension whenever and wherever you need it.

Included in the Box:
– 5 Hex Bits: 9/64″”, 3/16″”, 2 mm, 2.5 mm, 3 mm
– 3 Torx Bits: T10, T15, T25
– 10mm Wide Screwdriver Bit
– 1/2 “” Socket:
– 1/4″” Socket Adapter

Vortex Cantilever Ring Mount 30mm with 3-Inch Offset

219.99$ CAD +TX.

“Use this cantilever mount for mounting 30 mm telescopic sights onto flattop style AR-15 rifles. The 3-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum construction.

The cantilever ring mount positions the centre of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. 0.6 (lbs) weight.

Weighs 6.7 ounces.”

Vortex Cantilever Ring Mount 1-Inch with 3-Inch Offset

199.99$ CAD +TX.

“Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style AR-15 rifles. The 3-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum contruction.

The cantilever ring mount positions the centre of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. 0.6 (lbs) weight.

Weighs 6.7 ounces.”

Lo Pro Bubblevel for 30mm Riflescope Tube

124.99$ CAD +TX.

“This slim, low-profile design allows the Bubblevel™ to be mounted on most scopes without removing the scope from the rifle. It is easily visible without losing the sight picture. Mounts quickly and easily to the riflescope tube.

Made in USA”

ARD for Strikefire: Threaded

64.99$ CAD +TX.

“Reduce objective lens glare and reflection on any threaded StrikeFire red dot scope with this compact, anti-reflection device (ARD). In addition to reducing reflection, the threaded ARD protects the len from scratches and damage.

To add or remove the ARD:
1. Remove the flip cap from the StrikeFire.
2. Thread the ARD into/out of the objective lens barrel.
3. Push the flip cap back onto the StrikeFire.”

Vortex Bubble Level for 1-inch Riflescope Tube

84.99$ CAD +TX.

“For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

Mounts quickly and easily to the riflescope tube.”